icon

myTemp - Schemes

Hint

If the different pin numbers are confusing you, have a look at Palmsource's documentation of the handheld's serial interface and wiring of the serial cradle and cables.

connection to 10-pin palm ports

Direct connection to the 10-pin connector on Pilot, Palm®Pilot, Palm®III, Palm®VII, Palm®VIIx, Palm®IIIx, Palm®IIIe, Palm®IIIxe, Palm®V, Palm®Vx, Palm®IIIc, Palm®m100, Palm®m105. Looking at the back of the organizer, the pins are defined 1 to 10 moving from left to right.

connection to 16-pin palm ports

Direct connection to the 16-pin connector on Palm®m500, Palm®m505, Palm®m515, Palm®m125, Palm®i705, Palm®m130, Tungsten T. When viewing the handhelds front, the pins are defined 1 to 16 from left to right.

connection to serial HotSync cable

Connection to the handheld via a serial HotSync cable. (You need a male SubD-9 plug.)

connection to PC serial port

Connection to a PCs serial Port. (You need a female SubD-9 plug.)

connection to Macintosh serial port

Connection to a Macintosh's® RS422 serial Port. (This is only here, because I use on of these.)